AUTOPHIX Enhanced BMW Full Systems Diagnostic Scan Tool 7910 BMW All Special Functions OBD2 Scanner Auto Fault Code Reader Battery Registration Tool for All BMW After 1996 [2022 Version]

Main features for BMW 7910

1.Full OBDII functions:Read Fault Codes,Erase Fault Codes,Read Datastream,Vehicle Information,EVAP test

2.BMW Basic functions:Read Fault Codes,Erase Fault Codes,Read Datastream,Version Information

3.Reset Service interval indicator:Oil service,Inspection,Time interval,Correct follow-on service,Display service interval status

4.CBS Reset:Engine oil,Spark plugs,Front brakes,Rear brakes,Coolant,Diesel particle filter,Brake fluid,Microfilter,Vehicle inspection,Exhaust emission inspection,Vehicle check.

5.CBS Correct:Engine oil,Spark plugs,Front brakes,Rear brakes,Coolant,Diesel particle filter,Brake fluid,Microfilter,Vehicle inspection,Exhaust emission inspection,Vehicle check.

6.DME/DDE engine special functions:IQA，Idle speed adjustment，fuel injection rate，CO adjustment,etc.

7.DME/DDE engine special functios：Clear adaptions，Learn Valvetronic limit positions，Exhaust gas recycling,DPF Regeneration，Replace DPF

8.ABS/ASC/DSC special functions：bleeding routine，Mix-up checks, brake lines，Adjustment steering-angle sensor

9.Register battery replacement，Evaluate battery charge state

10.Adjustment steering-angle sensor

11.EPB Electronic Parking brake:Replace brake pads

12.EGS Clear adaptions

13.Reset Fuel pump

14.ACSM/airbag ECU reset，RDC TPMS ECU reset

AUTOPHIX 7910 Diagnostic Scan Tool for BMW

1.Injector : Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed;

2.Battery Register / Battery Maintenance : Evaluate the battery charge state, monitor the closed-circuit current, register the battery replacement, etc;

3.Electronic Throttle Position Reset / Learn : Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state;

4.Oil Light / Service Reset: Allows you to reset the service lamps on the instrument cluster;

5.Antilock Brake System (ABS) Service: Allows you to use the scanner temporarily to activate or control anti-lock brake system;

6.Tire Pressure Monitoring System (TPMS) Programming: Allows you to check the tire sensor IDs from the vehicle and to perform TPMS programming and reset after tires sensors are replaced or rotated;

7.Steering Angle Sensor (SAS) Calibration: Allows you to perform calibration of the steering angle sensor, which permanently stores the current steering wheel position as straight-ahead in the sensor . After calibrate sensor successfully, its fault memory will be automatically cleared;

8.Electronic Parking Brake (EPB) Service: Allows you to perform service and maintenance, including deactivation and activation of brake control system, bleeding brake fluid, opening and closing brake pads, and setting brakes after disc or pad replacement, on where electronic brake systems are fitted. Diagnoses EPB caliper functionality, initializes the wear indicator if new pads installed and deactivates or re-activates brake control system.